Bộ điều khiển SGDV-1R6A11B

Bộ điều khiển SGDV-1R6A11B

Sigma -V series servo motor SGMPS.
Rated output: 750W (0.75kw).
Power supply voltage: AC200V.
Serial encoder: 17 bit Delta (standard).
Design sequence: IP67 (standard).
Shaft end: straight shaft, without keyway (standard).
Optional: with hold brake (DC24V).
Corresponding to the RoHS instruction: in accordance with the RoHS directive SGDV-1R6A11B USER’S MANUAL.
Medium inertia
Flat type deep short
Equipped with high resolution serial encoder (17 bit)
Max speed up to 6000r\/min
Variety is complete (100W ~ 1 SGDV-1R6A11B 5kW, with hold brake)
Standard using IP55. Also applies to IP67 (optional).
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C SGDV-1R6A11B USER’S MANUAL.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: B.
Insulation withstand voltage: AC1500V 1 minutes.
Protection mode: fully enclosed self cooling type IP65 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationHigh performance, use the best type of servo unit (high performance) SGDV-1R6A11B USER’S MANUAL.
Maximum applicable motor capacity: 7.5kw.
Power supply voltage: three phase AC400V.
Design sequence: A.
Hardware specification: rack mounting type.
Interface: analog voltage, pulse sequence type (rotary servo motor).
Function: no deviation standard.
High performance sigma shaped -V-EX series.
2 models of high performance servo unit.
1. Yaskawa SGM7G-30AFC61
2. Yaskawa SGM7G-55AFC61
3. Yaskawa SGM7G-75AFC61
4. Yaskawa SGM7G-1AAFC61
5. Yaskawa SGD7S-470A20A001
6. Yaskawa SGD7S-550A20A001
7. Yaskawa SGD7S-780A20A
8. Yaskawa SGD7S-R70A20A001
9. Yaskawa SGD7S-3R8A20A001
10. Yaskawa SGD7S-7R6A20A001
11. Yaskawa SGD7S-200A20A001
12. Yaskawa SGDH-1EAE

Để lại một bình luận

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *